Timeout Between Decodes (Same Barcode) - Newland HR3290 Marlin User Manual

Enter Setup

Timeout between Decodes (Same Barcode)

Timeout between Decodes (Same Barcode) can avoid undesired rereading of same barcode in a given
period of time.
To enable/disable the Timeout between Decodes (Same Barcode), scan the appropriate barcode below.
Enable Timeout between Decodes: Do not allow the scanner to re-read same barcode before the
timeout between decodes (same barcode) expires.
Disable Timeout between Decodes: Allow the scanner to re-read same barcode.
** Disable Timeout between Decodes Enable Timeout between Decodes
The following parameter sets the timeout between decodes for same barcode. It is programmable in 1ms
increments from 0ms to 65,535ms. The default setting is 1,500ms.
To learn how to program this parameter, see Appendix 5.
Timeout between Decodes (Same Barcode)
** Exit Setup
35