Standard 25 - Newland NLS-EM2045 Series User Manual

Enter Setup

Standard 25

Restore Factory Defaults
Restore the Factory Defaults of Standard 25
Enable/Disable Standard 25
Enable Standard 25 ** Disable Standard 25
Set Length Range for Standard 25
The engine can be configured to only decode Standard 25 barcodes with lengths that fall between
(inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and
maximum lengths.
For more information, see the j. Program the Length Range (Maximum/Mininum Lengths) for a
Symbology in Appendix 8.
Set the Minimum Length (Default: 6) Set the Maximum Length (Default: 48)
Exit Setup 80
**