Table of Contents
Advertisement
Enter Setup
Barcode Programming
Scanning the Enter Setup barcode can enable the engine to enter the setup mode. Then you can scan a
number of programming barcodes to configure your engine. To exit the setup mode, scan the Exit Setup
barcode.
If the engine has exited the setup mode, only some special programming barcodes, such as the Enter
Setup barcode and Restore All Factory Defaults barcode, can be read.
Enter Setup
** Exit Setup
Programming barcode data (i.e. the characters under programming barcode) can be transmitted to the
Host. Scan the appropriate barcode below to enable or disable the transmission of programming barcode
data to the Host.
Transmit Programming Barcode Data
** Do Not Transmit Programming Barcode Data
Exit Setup
2
**
Advertisement
Table of Contents
