Maxicode
Restore Factory Defaults
Enable/Disable Maxicode
Enable
Set Length Range for Maxicode
The engine can be configured to only decode Maxicode barcodes with lengths that fall between
(inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and
maximum lengths.
For more information, see the j. Program the Length Range (Maximum/Mininum Lengths) for a
Symbology in Appendix 8.
Set the Minimum Length (Default: 1)
97
Restore the Factory Defaults of Maxicode
Maxicode
** Disable
Maxicode
Set the Maximum Length (Default: 150)
Enter Setup
**Exit Setup