Enter Setup
Code 39
Restore Factory Defaults
Restore the Factory Defaults of Code 39
Enable/Disable Code 39
** Enable Code 39
Disable Code 39
Set Length Range for Code 39
The engine can be configured to only decode Code 39 barcodes with lengths that fall between (inclusive)
the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum
lengths.
For more information, see the j. Program the Length Range (Maximum/Mininum Lengths) for a
Symbology in Appendix 8.
Set the Minimum Length (Default:
4)
Set the Maximum Length (Default:
48)
Exit Setup
66
**