Barcode Scanning; Barcode Programming - Newland NLS-FM50 User Manual

Barcode Scanning

Powered by area-imaging technology and Newland patented
scanning and accurate decoding. Barcodes rotated at any angle can still be read with ease. When
scanning a barcode, simply center the aiming beam or pattern projected by the scanner over the barcode.
The green Good Read LED on the scanner flashes once upon a good read.

Barcode Programming

Scanning the Enter Setup barcode can enable the scanner to enter the setup mode. Then you can scan
a number of programming barcodes to configure your scanner. To exit the setup mode, scan the Exit
Setup barcode.
If the scanner has exited the setup mode, only some special programming barcodes, such as the Enter
Setup barcode and Restore All Factory Defaults barcode, can be read.
Enter Setup
Programming barcode data can be transmitted to the host device. Scan the appropriate barcode below to
enable or disable the transmission of programming barcode data (i.e. the characters under programming
barcode) to the host.
Restarting the scanner will automatically disable the transmisison of programming barcode data to the
host.
Transmit Programming Barcode Data
9
technology, the FM50 features fast
** Exit Setup
** Do Not Transmit Programming Barcode Data