Table of Contents
Advertisement
RIGOL
Press HDMI to enter the HDMI setting menu.
Press Output continuously to enable or disable the video output.
⚫
ON: You can connect the instrument to an external display via this interface
➢
to better observe the waveform display clearly from the external display.
OFF: disables the interface.
➢
Press Resolution to set the screen resolution. The available resolution includes
⚫
640x480 , 720x480
USB Connection
The oscilloscope can communicate with a PC via the USB DEVICE interface on the
rear panel. No parameters are required to be configured.
20-6
1280x720.
, and
Chapter 20 System Utility Function Setting
MSO5000 User Guide
Advertisement
Table of Contents
