Table of Contents
Advertisement
Chapter 1 Quick Start
12. Trigger LEVEL/Threshold Level
When CH1-CH4 is selected as the trigger source, you need to set a proper
⚫
trigger level.
When D0-D15 is selected as the trigger source, you need to set a proper
⚫
threshold level.
The trigger level label
⚫
the trigger level/threshold level value is displayed at the upper-right corner
of the screen.
When you use Trigger
⚫
level, the trigger level/threshold level value will change with the up and
down of
Note:
In Slope Trigger, Runt Trigger, and Window trigger, you need to set the
upper and lower limits of the trigger level, and two trigger level labels (
) are displayed.
13. Operation Menu
Press any softkey on the front panel to activate the corresponding menu.
14. Notification Area
Displays the beeper icon, the USB storage device icon, time, and the LAN
connection icon.
Beeper icon: Press Utility → Beeper to turn on or off the beeper. When
⚫
the beeper is turned on,
displayed.
USB storage device icon: When a USB storage device is detected,
⚫
displayed.
Time: displays the system time. For the system time setting, refer to
⚫
descriptions in "System Time".
LAN connection icon: When the LAN interface is successfully connected,
⚫
will be displayed.
15. AWG 2
Displays the on/off status of AWG 2.
⚫
Displays the waveform type set for the current AWG2.
⚫
It is only available for the model installed with the MSO5000-AWG option.
⚫
16. AWG 1
Displays the on/off status of AWG 1.
⚫
Displays the waveform type set for the current AWG1.
⚫
It is only available for the model installed with the MSO5000-AWG option.
⚫
17. Digital Channel Status Area
Displays the current status of the 16 digital channels. The digital channels
currently turned on are displayed in green, and the currently selected digital
MSO5000 User Guide
is displayed at the left section of the screen, and
LEVEL to modify the trigger level/threshold
.
will be displayed; when off,
RIGOL
and
will be
will be
1-21
Advertisement
Table of Contents
