Interface Test; Usb Host Interface Test; Figure 3-1 Connection Of The Usb Host Interface At The Front Panel; Figure 3-2 Connection Of The Usb Host Interface At The Rear Panel - Rigol DS1074B Service Manual

RIGOL

Interface Test

USB Host Interface Test

Purpose: Test whether the USB Host interface works normally using a USB storage
device.
Tools:
A set of DS1000B series digital oscilloscope

A USB storage device

Steps:
1. Insert the USB storage device into the USB Host interface at the front panel or
rear panel of the oscilloscope.

Figure 3-1 Connection of the USB Host Interface at the Front Panel

Figure 3-2 Connection of the USB Host Interface at the Rear Panel

2. When the USB storage device is correctly detected and the USB Host interface
works normally, "USB device installed" is displayed on the screen. Otherwise,
please check or repair this interface.
3-2
Chapter 3 Performance Test
DS1000B Service Guide