Changing The Normal/Bypass Code - Rosslare AC-G4 Series Installation And Programming Manual

Programming
3. Enter the new 4-digit Normal/Secure code.
You hear three beeps.
The system returns to Normal mode.
5.7

Changing the Normal/Bypass Code

The Normal/Bypass code is also used to turn the door chime off and
on. Chime only functions with the BL-D40 external sounder.
• The chime is only heard when the Lock Strike relay is activated by a
valid code entry.
• Code 0000 erases and deactivates the Normal/Bypass code.
To change the Normal/By pass code:
1. Enter Programming mode.
2. Press 5 to enter Menu 5.
The left LED flashes orange.
3. There are four different ways to program the Normal/Bypass code
and door chime:
Disable both Bypass code and the door chime.
Enter the code 0000.
Disable Bypass code and enable the door
chime. Enter the code 0001.
Enable Bypass code and disable the door
chime. Enter any code ending with 0.
Enable Bypass code and enable the door
chime. Enter a code not ending with 0.
You hear three beeps.
The system returns to Normal mode.
28 AC-F/G4x Series Installation and Programming Manual
Green
Green
Orange Green
Green