Rosslare AC-G4 Series Installation And Programming Manual page 40

Programming
5.12.3.2 Enrolling Secondary Codes using the Code Search
Method
The code search method enables to quickly enroll a secondary code
for a user whose primary code is known and whose slot number is
unknown.
To enroll secondary codes using the Code Search method:
1. Enter Programming mode.
2. Press 7 to enter Menu 7.
The right LED turns orange.
3. Enter 000 as the 3-digit user slot number.
The right LED flashes orange.
The controller is now waiting for the Primary code of the user to
whom you want to add a Secondary code.
4. Perform one of the following:
Enter the PIN code belonging to the user for
whom you wish to add a Secondary code.
Present the user card belonging to the user for whom you wish to
add a Secondary code.
The left LED flashes red.
If the Primary code entered is not valid, you hear a long beep and
the unit continues to wait for a valid Primary code.
40 AC-F/G4x Series Installation and Programming Manual
Green
Orange
Orange
Red Orange