Deleting Primary And Secondary Codes; Deleting Primary And Secondary Codes Using The Standard Method - Rosslare AC-G4 Series Installation And Programming Manual

Programming
5. Perform one of the following:
 Enter the PIN code to be used as the
Secondary code.
 Present the user card to be used as the Secondary code.
If the Secondary code is valid, the controller beeps three times
and returns to Normal mode.
If the Secondary code is invalid, the controller sounds a long
beep, and the unit continues to wait for a valid Secondary code
to be entered.
5.13

Deleting Primary and Secondary Codes

There are two methods to delete Primary and Secondary codes: a
standard method and a search method. When deleting a user slot,
both the primary code and the secondary code are erased.
It is recommended that a record be kept of added and deleted
users. This makes it easier to keep track of user slots' status
(empty or not).
5.13.1 Deleting Primary and Secondary Codes using the
Standard Method
To delete the Primary and Secondary codes using the Standard
Method:
1. Enter Programming mode.
2. Press 8 to enter Menu 8.
The left LED turns red and the right LED turns
orange.
3. Enter the 3-digit User Slot code you wish to
delete.
AC-F/G4x Series Installation and Programming Manual
Green
Red
Orange
41