Fx (Master Fx Page) - Kurzweil K2700 Musician's Manual

Global Mode

FX (Master FX Page)

CC Pedal Overrides
In a similar manner to Switch Pedal Overrides, the CC Pedal Override parameters (CC1-2
Override) allow the Continuous Control Pedal assignments to be changed for all Programs
and Multis. The alternative assignments available for the CC Pedal Overrides include Mod
Wheel (MIDI CC 1), Foot/Wah (MIDI CC 4), Volume (MIDI CC7), Expression (MIDI
CC11) and Pressure.
In Multi Edit Mode, if a pedal is selected which has a pedal override enabled in Global
mode, a message "Global Pedal Override is enabled" will display when that pedal is viewed to
remind you that the Global mode pedal override settings are being used instead of the Multi
mode pedal settings.
Rotary Override
By default KB3 organ programs have the Slow/Fast speed control for the Rotary speaker
effect assigned to the Variation Button and the Sustain Pedal (SW1A). The Rotary Override
parameter allows you set the sustain pedal to function as sustain for all KB3 Programs,
instead of Rotary Slow/Fast. The Variation button will always control the Rotary speed,
regardless of this parameter's setting.
FX (Master FX Page)
Press the FX soft button to view the Master FX page. The Master FX page contains master
EQ and compressor settings. When the master EQ or compressor is enabled, all audio signals
from the K2700 are processed by these effects.
When the Compressor is set to On, use the Comp Amount parameter to set the compression
amount between 1 (least compressed) and 11 (most compressed).
9-12