Fm Amp + Output Page - Kurzweil K2700 Musician's Manual

Program Edit Mode

FM Amp + Output Page

FM Amp + Output Page
Amp Parameters
The left-hand column of the FM Amp + Output page shows amplitude modulation
parameters for the layer. Use the left-hand column of the page to adjust and modulate the
overall output level of the current FM layer.
Adjust
Use the Adjust parameter to set the overall output level of the current FM layer.
Vel Track
Use the Vel Track parameter to modulate the amplitude of each note in the layer based on
the MIDI velocity of each note played.
Positive Vel Track values will progressively increase the amplitude for higher velocities.
For example, with a positive Vel Track value, playing a velocity of 0 causes no change in
amplitude, playing each velocity further above 0 increases the amplitude by the Vel Track
amount.
Key Track
Use the Key Track parameter to modulate the amplitude of each note in the layer based on
the MIDI note number of each note played.
Positive Key Track values will progressively increase amplitude for each note played above
middle C, and progressively decrease amplitude for notes played below middle C. For
example, with a positive Key Track value, playing middle C causes no change in amplitude,
playing each key further above middle C increases the amplitude by the Key Track amount,
and playing each key further below middle C decreases the amplitude by the Key Track
amount.
3-102