Kurzweil K2700 Musician's Manual page 225

Multi Edit Mode
Navigation
Zones
Use the CHANNEL/LAYER/ZONE/TRACK buttons to change the current Zone. Most
parameters apply only to the currently selected Zone, which will be shown in the top right
corner of the display. Some parameters on the CONTROLS page apply to all Zones. When
a CONTROLS page parameter is selected which applies to all Zones, "All Zones" will be
displayed in the top right corner of the display. Parameters on the FX Page, COMMON
Page and ARP Page apply to all Zones.
The EDIT Button in the Multi Editor
When certain parameters are selected, additional editor pages can be accessed by pressing the
EDIT button. The EDIT icon appears at the top of the screen when the EDIT button can be
used.
Press the EDIT button to enter sub editors when the following fields are selected:
• Programs on the OVERVIEW page
• FX Chains on the FX and AUDIO IN pages
• Patterns on the ARP page (Shift, Velocity, and Duration)
Assign
Assign is the secondary function of the Enter button. You can use the Assign function to
quickly select parameters or set values for parameters by holding the Enter button while
moving K2700 controllers (Knobs, Sliders, Buttons, Keys, Wheels, and Pedals).
Parameters that can use the Assign function are indicated by showing the Assign symbol in
the top right corner of the display when selected.
Select a Key Range
When the OVERVIEW Page Key Range fields are selected, hold the Enter button and press a
keyboard key to set the low or high Key Range.
Select a Physical Controller
When the CONTROLS Page Controller field is selected, hold the Enter button and move a
physical controller to select the moved controller.
Select a Controller Destination
When a CONTROLS Page Destination field is selected, hold the Enter button and move
a controller to select the default destination for that controller. This is an easy way to assign
Multi Controllers to their Program Mode assignments.
7-2