Fm Main Page - Kurzweil K2700 Musician's Manual

Program Edit Mode

FM MAIN Page

FM MAIN Page
In FM layers, the FM Main page allows you to edit the main parameters of each FM
Operator in the layer.
The parameters for each Operator are shown on the page in rows. The left hand column
shows the Operator number for each row. Use the navigation buttons to select each row and
parameter.
Alg
Use the Alg parameter to select 1 of 32 algorithms. Each algorithm changes how the
Operators are connected to one another, determining which operators are heard as audio
signals, and which are used as modulation sources.
The algorithm diagram to the right of the Alg parameter shows each Operator as a numbered
box, with lines between each operator to show how they are connected.
The Operator or Operators in the bottom row of the diagram are heard as audio. Operators
in higher rows are used as modulation sources. Modulation sources can also be modulated by
other Operators in higher rows.
Each algorithm also shows a line determining the feedback path, in which the output of an
Operator is used as its own modulation source, or as a modulation source for Operators in
higher rows.
Level
Use the Level parameter to set the output level of each Operator.
3-88