Fm Layer Page - Kurzweil K2700 Musician's Manual

Program Edit Mode

FM Layer Page

Freq MinDpt
Use the Freq MinDpt parameter to set the minimum modulation depth of Freq Source 2.
When a Freq DepthCtl control source is at its minimum value, Freq Source 2 will apply the
amount of modulation set by the Freq MinDpt parameter.
Freq MaxDpt
Use the Freq MaxDpt parameter to set the maximum modulation depth of Freq Source 2.
When a Freq DepthCtl control source is at its maximum value, Freq Source 2 will apply the
amount of modulation set by the Freq MaxDpt parameter.
FM Layer Page
Transpose
Use the Transpose parameter to adjust tuning in semitones for all Operators in the layer.
Detune
Use the Detune parameter to adjust fine tuning for all Operators in the layer. This is useful
for creating a chorus effect by applying different Detune values to multiple FM layers which
are set to the same settings.
3-96