Kurzweil K2700 Musician's Manual page 141

Program Edit Mode
FM Layer Page
Pitch Mod Sensitivity
Use the Pitch Mod Sensitivity parameter to make coarse adjustments to pitch modulation
depth of the FM LFO for all FM Operators in the layer. Pitch Mod Sensitivity can be set to
values from 0-7, where 0 applies no pitch modulation, 1 applies the least pitch modulation,
and 7 applies the most pitch modulation.
The Pitch Mod Sensitivity parameter works in combination with the Pitch Mod Depth
parameter. To apply pitch modulation the Pitch Mod Sensitivity parameter and Pitch Mod
Depth parameter must both be set to a value greater than 0.
FM LFO Speed
Use the FM LFO Speed parameter to set the speed of the FM LFO. FM LFO Speed can be
set to values from 0-99, 0 is the slowest and 99 is the fastest.
FM LFO Shape
Use the FM LFO Shape to select an LFO shape for the FM LFO. The FM LFO can apply
amplitude and pitch modulation to the FM Operators, see the Amp Mod Depth and Pitch
Mod Depth parameters for details.
FM LFO Delay
Use the FM LFO Delay parameter to add a delay between when a note is played and when
the FM LFO will apply modulation. FM LFO Delay can be set to values from 0-99, where 0
applies no delay, 1 applies the least delay, and 99 applies the most delay.
FM LFO Key Sync
Use the FM LFO Key Sync parameter to turn FM LFO key sync off or on.
When FM LFO Key Sync is set to On, the FM LFO resets its phase each time a note is
played.
When FM LFO Key Sync is set to Off, the FM LFO does not reset its phase each time a note
is played. In some programs this can be useful for adding variations to each note played.
3-98