Multichannel Midi In Program Mode - Kurzweil K2700 Musician's Manual

Saving a User Program
Press the Save button or Save soft button to complete the saving process, or press the Cancel
soft button to exit without saving. After successfully saving, the Program will be selected in
Program Mode.
To find the Program again later, press the User button and scroll to the Program ID. You
can also find the program by pressing the appropriate Category button and scrolling past the
factory programs. Lastly, you can press the KEYPAD button so that its LED is lit, type the
Program ID number, then press the Enter button.

Multichannel MIDI in Program Mode

Program Mode has 16 MIDI Channels that can be used for multichannel MIDI
applications, such as playing multiple Programs at once from an external MIDI controller, or
from a hardware/software sequencer for recording multitrack songs. A different Program can
be selected for each MIDI Channel, and all Channels can be triggered simultaneously from
an external MIDI device.
Changing the MIDI Channel
The current MIDI Channel is shown on the right side of the top line of the Display. Press the
CHANNEL/LAYER/ZONE/TRACK Up or Down buttons to change the MIDI Channel.
Pressing both of the CHANNEL/LAYER/ZONE/TRACK buttons simultaneously will select
MIDI Channel 1.
When playing only a single Program at a time, any Channel can be used.
When playing multiple Programs at once, you can select the Program on each Channel
manually, or by receiving Program Change messages on each Channel from an external
MIDI device.
Note: The Aux FX Chains of the Program on the currently selected MIDI Channel are used
for Programs on all Channels.
Note: If Quick Access view is selected, the CHANNEL/LAYER/ZONE/TRACK Up or
Down buttons will select the current Quick Access Bank , and the Quick Access Bank
number will be shown instead of the current MIDI Channel. For details on Quick Access
view, see
Multichannel FX
In Program Mode, Multi Mode, and Song Mode, 32 FX units are shared between the 16
Channels to load all Insert and Aux FX Chains, and two Aux FX Chains can be used by the
Programs on all 16 Channels at one time.
"Display" on page 9-2.
Multichannel MIDI in Program Mode
Program Mode
2-13