Table of Contents
Advertisement
For all parameters with a Value of None, any values set with a physical control
will not be saved when saving the program. You must set the Value column for
that parameter to something other than None in order to set and save a value.
These values will remain set until changed with a controller, or until a program is
loaded on the current MIDI channel that does not have a value of None for these
parameters.
FX Page
Press the FX soft button to call up the FX page (Effects page). Use this page to apply audio
effects to a program. You can choose an effects chain for insert effects and an effects chain for
auxiliary effects 1 and 2.
The Forte's chains contain a variety of effects. Each chain displays icons representing the
type of effects contained in the chain, as well as the order of effects in the chain (signal flows
from left to right). The Forte's chains include different types of reverb, chorus, delay, flanger,
phaser, tremolo, panner, leslie, distortion, EQ, compression, filter, envelope following filter,
frequency stimulator, ring modulator, frequency offset, pitch LFO, and stereoizer.
Parameter
Insert
Aux 1
Aux 1 Send
Aux 2
Aux 2 Send
Aux 2 Send (Piano Programs)
Output
Pre/Post Ins
Range Of Values
Effect list (See Appendix F)
Effect list (See Appendix F)
0 to 100%
Effect list (See Appendix F)
0 to 100%
Off, -95dB to 24dB
A, B
Post, Pre
Program Edit Mode
Program Pages
Default Value
0 None
0 None
0%
0 None
0%
Off
A
Pre
7-7
Advertisement
Table of Contents
