The Transport Section - Kurzweil K2700 Musician's Manual

Song Mode

The TRANSPORT Section

The TRANSPORT Section
Use the TRANSPORT section of the front panel to control playback and recording.
The PLAY/PAUSE Button
When the song status is Stopped, press the PLAY/PAUSE button to play the song from the
bar and beat specified by the Locate parameter.
When the Song Status is Rec Ready, press the PLAY/PAUSE button to begin recording.
When the song is status is Playing, press PLAY/PAUSE to pause the playback. Press PLAY/
PAUSE again to continue playing from the same location.
When the song is status is Recording, press PLAY/PAUSE to stop the recording, as if you
had pressed the STOP button.
The STOP Button
When the song is status is Playing or Recording, press the STOP button to stop playback or
recording and reset the song's location to the bar and beat previously specified by the Locate
parameter. If the location previously specified by the Locate is something other than Bar 1,
Beat 1, press STOP twice to reset to 1:1.
When the song is status is Recording, pressing the STOP button will display the "Save
Changes" dialog (see below).
The RECORD Button
RECORD: When the Song Status is Stopped, press the RECORD button to change the
Song Status to Rec Ready. When the Song Status is Playing, press the RECORD button to
change the Song Status to Recording.
The LOCATE START Button
When the Song Status is Stopped, press the LOCATE START button to reset the Locate
parameter to Bar 1, Beat 1.
The LOCATE BACK Button
Press the LOCATE BACK button to subtract one Bar from the current value of the Locate
parameter.
8-2