Kurzweil K2700 Musician's Manual page 247

Multi Edit Mode
CONTROLS Page
Controller
Number
173
174
175
176
177
178
180
181
182
183
184
7-24
Controller
Destination
Selects one of the 128 patterns in the current ARPEGGIATOR VelPatt Bank. (See
VelPatt
Velocity Patt on page
A controller value selects the corresponding Velocity Patt Bank for the
VelPBank ARPEGGIATOR page of a controller's zone. For example, controller value 2 selects
Velocity Patt bank 2, controller value 7 selects Velocity Patt bank 7.
Set's arpeggiator velocity when ARPEGGIATOR Velocity Mode is set to Fixed. (See
VelFixed
Velocity on page
ShKeyNum Shift Key Number (see below)
ShiftKey Shift Key (see below)
Same as 176 ShKeyNum, but the Shift Pattern's velocity will be modified by the
ShKeyNuV
current velocity pattern of the zone.
Selects the Intonation Map (IDs 0-127) in a MIDI channel in real time. On the Multi
Chan Intonation Edit CONTROLS page, when setting a switch controller to this Destination the
name of the selected Intonation Map will be displayed. For example: 18 (EastMed).
Selects the Intonation Key (C through B) in a MIDI channel in real time. On the
Multi Edit CONTROLS page, when setting a switch controller to this Destination the
Chan Int Key
MIDI number and note name of the selected Intonation Key will be displayed. For
example: 41 (D#).
Toggles a selected Arpeggiator pattern step on or off. Assign this destination to a
Switch Controller with Type set to Momentary, On Value set to the desired step
Arp Step number, and Off Value set to None. The current Zone must have an Arpeggiator set
to Classic Mode using a Shift Pattern, Velocity Pattern, or Duration Pattern, or must
be set to Step Sequencer Mode.
Toggles a selected CC Sequencer pattern step on or off. Assign this destination to
a Switch Controller with Type set to Momentary, On Value set to the desired step
CC Seq Step
number, and Off Value set to None. The current Zone must have a CC Sequencer
with at least one Sequence which has the Mode parameter set to User.
Pads Control Controls the Multi Edit Common Page "Pads Control" parameter.
Description
3-34)
3-32)