Kurzweil K2700 Musician's Manual page 313

Global Mode
MAIN 1 Page
Transpose
The Transpose parameter allows you to tune the pitch of the unit in semitones.
Display
The Display parameter allows you to change the way that Programs and Multis are displayed
on the Program and Multi Mode main pages by selecting one of three different "views". See
the Program and Multi Mode chapters for details on using the views in each Mode.
The default view is Large, which displays the Program or Multi name with large text, along
with the category name and background image.
List view displays the current Program or Multi as a selected item in a list showing the next
and previous Programs or Multis.
Quick Access view shows the names of 10 favorite Programs and/or Multis, which can be
selected by pressing the corresponding numbers on the Keypad. (Program/Multi names
become smaller when the Show Zone Info parameter is set to Yes.) To access more than 10
Programs/Multis, use the CHANNEL/LAYER/ZONE/TRACK buttons to select a different
Quick Access Bank. The current Quick Access Bank number is shown in the top right corner
of the display. Programs or Multis which are not stored in a Quick Access Bank can be
browsed by using the ALPHA WHEEL or PREVIOUS/NEXT buttons.
When Quick Access view is selected, press and hold one of the Keypad buttons (0 through 9)
to store the currently selected Program or Multi to a spot in the current Quick Access Bank.
User edited Quick Access Banks can also be renamed, see
details.
Note: When Quick Access view is selected, the CATEGORY buttons always select an entry
in the current Quick Access bank, despite the state of the KEYPAD button. To type an ID
number when the KEYPAD button is on, you must press the VIEW soft button and select
Large or List view.
"Large" and "Quick Access" views can also show controller assignments and values when
a controller is moved (Knobs, Sliders, Switch buttons, Wheels, and Pedals). See "Show
Controllers" below for details.
Show Controllers
When "Large" or "Quick Access" view is selected for the Display parameter (see above), the
Program and Multi Mode main pages can briefly show controller assignments and values
when a controller is moved. Set this parameter to No to hide controller assignments. Set it to
Yes to briefly show controller assignments when a controller is moved (Knobs, Sliders, Switch
buttons, and Wheels, but not Pedals or Pressure). Set it to Yes (Incl. pedals) to show all
controllers, including Pedals and Pressure.
9-2
"QA Banks" on page 9-25 for