Table of Contents
Advertisement
Operating instructions
4.3.3 Daily cleaning
Internally
•
•
•
•
•
•
•
•
•
•
•
Filter for final rinse
Switch off the machine using button (12).
Empty the tanks by turning the level pipe (31) and the drain seal (27) a
quarter of a turn.
Clean the filters (29, 30, 32), all partitions (19), level pipe (31), outlet seal
(24) and the nozzles for pre-rinse (16) and final rinse (20, 21).
Never leave the level pipes (31) and outlet seal (27) so that the rubber
sleeves (28) rest on a surface. The sleeves can become deformed leading
to the risk of water leakage in the tanks.
Clean the washer arms (17).
Clean the doors (14). Wipe the rubber strips on the doors which are fitted
at the top of the back of the doors.
Rinse all the inside surfaces of the machine and clean the tanks.
Clean the final rinse filter (26).
Empty the final rinse tank and clean the filter (25). The filter is placed be-
hind the lower door at the outfeed end. Unscrew the cover (A) and remove
the filter (B). Clean the filter. Make sure that the cover seal provides a good
seal when refitting.
Refit the components.
Leave the doors open.
2
3
WD-ACS 47D
B
1
4
5
26
Rev. 1.0 (202003)
A
Rec_filter_R1
Advertisement
Table of Contents
