Connecting A Smart Ops Pc Module; Connecting Other Devices - SMART Board SBID-7275R Installation And Maintenance Manual

Chapter 3
Connecting computers and other devices
Sharing USB Type-B receptacles
The HDMI and VGA connectors on the connector panel share USB Type-B receptacles:
USB Type-B receptacle
Touch 1
Touch 2
If two computers are connected to video connectors that share the same USB Type-B receptacle, you must
disconnect the USB cable from the first computer and connect it to the second computer if you want to
switch from one computer's input to the other's. For example, if a room computer is connected to HDMI 1
and a guest laptop is connected to HDMI 2, you must disconnect the USB cable from the room computer
and connect it to the guest laptop when you want to switch to the guest laptop's input.

Connecting a SMART OPS PC module

If your organization has purchased a SMART OPS PC module, you or your
organization's installers can install the OPS PC module in the display's accessory
slot following the OPS PC module's installation instructions
(smarttech.com/kb/171544). You can then view the OPS PC module's input on the
display.
For more information about SMART OPS PC modules, see the SMART OPS PC
modules user guide (smarttech.com/kb/171747).

Connecting other devices

In addition to computers, you can connect the following devices to the display:
USB drives, peripherals, and other devices
l
External displays
l
External audio systems
l
Room control systems
l
smarttech.com/kb/171538
Video connectors
HDMI 1
l
HDMI 2
l
HDMI 3
l
VGA
l
37