SMART Board SBID-7275R Installation And Maintenance Manual page 59

Appendix A
Adjusting settings
Option
SMART iQ Ethernet
Advanced options
Static IP (Use DHCP)
Proxy (Use proxy)
Proxy (Auto-configure)
MAC Address
IP Address
SMART WOL Ethernet
Wake on LAN
MAC Address
Bluetooth
Bluetooth
View available bluetooth
devices
SMART Cloud
Service Region
smarttech.com/kb/171538
Values Function
[N/A] Options available when an Ethernet
cable is connected
On Enables or disables DHCP to assign
the display an IP address.
Off
On Enables or disables a proxy server for
connecting to the network.
Off
On Enables or disables automatic
configuration of the proxy server for
Off
connecting to the network.
[N/A] Shows information about the network
the display is connected to.
[N/A] Shows information about the network
the display is connected to.
On If enabled, you can send a command
to the display to wake it up to accept
Off
further commands but backlight
remains off.
[N/A] Shows information about the network
the display is connected to.
On Enable or disable the display's
Bluetooth.
Off
[N/A] Shows available Bluetooth devices.
[N/A] Shows the service region.
Notes User or system
setting
[N/A] System
[N/A] User
[N/A] User
[N/A] User
[N/A] System
[N/A] System
The Wake On System
LAN setting is
disabled by
default for
customers based
in the EU. To use
the Wake On LAN
setting, enable it
before you install
the iQ system
software update.
[N/A] System
Turn on System
Bluetooth to view
available
Bluetooth
devices.
Turn on System
Bluetooth to view
available
Bluetooth
devices.
[N/A] System
59