SMART Board SBID-7275R Installation And Maintenance Manual page 69

Appendix A
Adjusting settings
Option
Clean Up other
applications
Software Update
Updates Channel
System Updates
Channel
Check for Updates
Now
Remote Management
Launch Remote
Management Settings
Remote Management
Enabled
Radix Viso version
About
Board Name
smarttech.com/kb/171538
Values
[N/A]
Stable Channel
Beta Channel
Stable Channel
Beta Channel
[N/A]
[N/A]
On
Off
[N/A]
[N/A]
Function
Closes open applications.
Sets which iQ system software
updates the display receives.
Sets which display updates
the display receives.
Checks for updates to the
system software.
NOTE
The display must be
connected to the internet to
check for system software
updates or a USB drive with
the system software update
file is connected to the
display.
Configure the display's
connection settings with the
Radix Viso server.
Enables or disables Remote
Management on the display.
Shows the Radix Viso version.
Select a name for your
display.
Notes User or system
setting
[N/A] System
When switching System
from the Beta
channel to the
Stable channel, a
factory reset
occurs. See
page 67 for more
information about
factory reset.
For more
information about
the Beta
Channel, see
Switching to the
Beta channel.
[N/A] System
If an update is [N/A]
available, the text
changes to Apply
update now.
This option is System
only enabled
when Remote
Management is
enabled.
[N/A] System
[N/A] System
[N/A] System
69