Cleaning And Maintaining Hardware; Checking The Display Installation - SMART Board SBID-7275R Installation And Maintenance Manual

Chapter 4
Maintaining the display
3. Flick the switch beside the AC power inlet to the OFF (O)
position.
NOTE
Wait at least 30 seconds before turning the display back on.
To turn the display back on
1. Flick the switch beside the AC power inlet to the ON (I) position.
2. Press the Power button
To reset the display
Press and hold the Power button
The display resets.

Cleaning and maintaining hardware

Checking the display installation

Inspect the display installation frequently to ensure that the display remains securely installed.
Check the mounting location for signs of damage or weakness that can occur over time.
l
Check for loose screws, gaps, distortions, or other issues that could occur with the mounting hardware.
l
If you find an issue, contact a trained installer.
smarttech.com/kb/171538
on the convenience panel or the remote control.
on the convenience panel or the remote control for 10 seconds.
45