SMART Board SBID-7275R Installation And Maintenance Manual page 64

Appendix A
Adjusting settings
Option
Energy Saver
Go to energy saving
mode after
Standby (Shutdown)
Networked Standby
(Sleep)
External Inputs
Apply power settings
even when displaying
an external video
source
Display
Screen Adjustment
Brightness
smarttech.com/kb/171538
Values
Disabled
1 min
5 mins
30 mins
1 hour
1.5 hours
2 hours
5 hours
10 hours
[N/A]
[N/A]
On
Off
0–100
Function
Sets the number of minutes of
inactivity before the display
enters an energy saving
mode.
If selected, the display will
turn off all running
components to achieve
maximum energy savings but
wakes up slower.
If selected, the display wakes
up faster and can be turned
on up by a Wake on LAN
command from the network.
If enabled, the display will
enter an energy saving mode
even when an external video
input is connected.
Sets the overall brightness of
the image.
Notes User or system
setting
The default is 60 System
minutes.
This option is System
more energy
efficient.
This option is the
default for
displays in the
EU.
For information
about the
display's energy
saving modes,
see <xref>.
This option is less System
energy efficient.
This option is the
default for
displays not in
the EU.
For information
about the
display's energy
saving modes,
see <xref>.
[N/A] System
[N/A] System
64