Chapter 5: Troubleshooting; The Display Isn't Turning On - SMART Board SBID-7275R Installation And Maintenance Manual

Chapter 5
Troubleshooting

The display isn't turning on

The display is turning on when it shouldn't
The screen is blank or there's a problem with the image on the screen
There's no sound or there's a problem with the sound
Touch isn't working as expected
The pens and erasers aren't working as expected
The Wi-Fi module isn't working as expected
iQ apps aren't working as expected
SMART software on connected computers isn't working as expected
The SMART OPS PC module isn't working as expected
Contacting your reseller for additional support
This chapter explains how to resolve a variety of common issues with the display. If the symptoms you're
encountering aren't covered below or the solutions to the symptoms don't work, refer to the SMART
knowledge base for additional troubleshooting information
community.smarttech.com/s/topic/0TOU0000000kAJ0OAM/interactive-displays
The display isn't turning on
Symptom
The power light isn't lit.
smarttech.com/kb/171538
Troubleshooting steps
Make sure the power cable is securely fastened to the power outlet and the display.
l
NOTE
If the power cable is connected to a power bar, make sure the power bar is securely
fastened to the power outlet and turned on.
Make sure the switch beside the AC power inlet is in the ON (I) position.
l
Make sure the power outlet is working by testing it with a different device.
l
Make sure the power cable is working by testing it with a different device.
l
50
51
51
53
54
54
55
55
56
56
56
50