Table of Contents
Advertisement
TRENDnet User's Guide
Interface: Displays the interface of the access point
Status: Displays the current status of the interface
Channel: Displays the operating channel of the wireless interface
Rate: Displays the data rate of the interface.
Associated Information
Open "Connections" in "Status" to check the information of associated wireless devices
such as MAC address, signal strength, connection time, IP address, etc. All is read only.
Click "Refresh" at the bottom to update the current association list. By clicking on the
MAC address of the selected device on the web you may see more details including
device name, connection time, signal strength, noise floor, ACK timeout, link quality, IP
information, current data rate, current TX/RX packets.
1. Log into the management page (see
2. Click on Status, and click on Connections.
Refresh: Click to refresh to view the current information
Statistics
You may want to check the statistical received and transmit packets of the wired and
wireless connections of the access point.
1. Log into the management page (see
2. Click on Status, and click on Statistics.
© Copyright 2015 TRENDnet. All Rights Reserved.
"Access the management
page" on page 27).
"Access the management
page" on page 9).
Refresh: Click to refresh to view the current information
Poll Interval: Specify the refresh time interval in the box beside "Poll Interval"
and click "Set Interval" to save settings. "Stop" helps to stop the auto refresh of
network flow statistics.
ARP Table
You may want to view the access point's current ARP table.
1. Log into the management page (see
2. Click on Status, and click on ARP Table.
Refresh: Click to refresh to view the current information
Bridge Table
This page allows you to view any active bridge connections to the access point.
1. Log into the management page (see
2. Click on Status, and click on Bridge Table.
TEW-734APO
"Access the management
page" on page 9).
"Access the management
page" on page 9).
34
Advertisement
Table of Contents
