TRENDnet User's Guide
AP Management
This page displays thin access points connected in the network.
1. Log into the management page (see
2. Click on Management section and AP Management.
3. Select the access point you would like to configure.
Restart: Click this option to restart the selected device(s)
Rename: Click this option to rename the selected access point
Set IP: Click this option to change the IP address of the selected device
Radio: Select this option to change the wireless radio settings of the selected
device
Upgrade Selected: Select this option to upgrade the selected devices
Upgrade All: Select this option to upgrade all devices
Refresh: Click to refresh the access point list
System Setting
This page displays thin access points connected in the network.
1. Log into the management page (see
2. Click on Management and System Settings.
Device Settings
© Copyright 2015 TRENDnet. All Rights Reserved.
"Access the management
page" on page 9).
"Access the management
page" on page 9).
Device Mode: Select the mode you would want the access point to operate on.
Connect Mode: Select the mode the access controller will be connected
Device Name: Enter the name of the device
Spanning Tree: Select to enable Spanning Tree feature
STP Forward Delay: Enter the delay time duration
Enable VLAN
Enable 802.1Q VLAN: Select to enable VLAN feature
VLAN ID: Enter the assigned VLAN ID of the access controller
IP Address
TEW-734APO
48