Dhcp Clients; Thin Ap - TRENDnet TEW734APO User Manual

TRENDnet User's Guide
 Refresh: Click to refresh to view the current information

DHCP Clients

This page displays the access point's current DHCP clients.
1. Log into the management page (see
2. Click on Status, and click on DHCP Clients.
 Refresh: Click to refresh to view the current information
© Copyright 2015 TRENDnet. All Rights Reserved.
"Access the management page" on page 9).

Thin AP

Below describes the configuration settings when the TEW-734APO System Mode is set
to Thin AP mode. In this mode the access point can only be configured with a device set
on Virtual Access Control mode.
Configuration
1. Log into the management page (see
2. Your access point will prompt you for a user name and password.
3. Enter the default user name and password and then click Login.
Default User Name: admin
Default Password: admin
4. Click the System button on the left side and then System Settings.
5. Select Thin AP in the Device Mode drop down menu.
TEW-734APO
"Access the management page" on page 9).
35