Led Controls; Client Bridge; Basic - TRENDnet TEW-921DAP User Manual

TRENDnet User's Guide

LED Controls

System > LED Control
1. Log into your management page (see
2. Click on the System tab and click LED Control.
3. Review the settings and click Save to save settings.
• Power LED: Select On to leave Power LED on or Off option to turn off.
4. Click on Apply button to apply the settings and then click on the Save button located
on the top right section to save the settings.
IGMP Snooping
System > IGMP Snooping
1. Log into your management page (see
2. Click on the System tab and click LED Control.
3. Review the settings and click Apply to save the settings.
•
Status: Select Enable to enable IGMP Multicast traffic
© Copyright 2017 TRENDnet. All Rights Reserved.
"Access the management page" on page 13).
"Access the management page" on page 13).
LLDP
System > LLDP
1. Log into your management page (see
2. Click on the Management tab and click SSH Management.
3. Select Enable to enable LLDP. Enabling LLDP allows network devices to advertise
information about themselves to other devices on the network.
4. Click on Apply button to apply the settings and then click on the Save button located
on the top right section to save the settings.

Client Bridge

Basic

Wireless (2.4GHz or 5GHz) > Wireless Network
TEW-921DAP
"Access the management page" on page 16).
31