Bridge Mode - TRENDnet TEW734APO User Manual

TRENDnet User's Guide
1. Log into the management page (see
2. Click on Wireless button and click on Basic Settings.
3. Select Wireless Client in the Operation Mode pull down menu and click Apply.
4. Click Site Survey button.
5. The access point will automatically scan for available access points.
6. Select the access point or wireless network you want to connect.
7. Click either Select AP , Select SSID or Scan option.
 Select AP: Configures the access point based on the selected AP's SSID and MAC
address
 Select SSID: Configures the access point based on the selected AP's SSID only
 Scan: Scans for available wireless networks.
8. Click Apply when you have selected the wireless network you want to connect with.
9. If your wireless network is configured with wireless security, click Profile Settings
 Security Settings: Select and configure the wireless security of your wireless
network. Click Apply to save settings. Please refer to Wireless Encryption Type
section on page30.
© Copyright 2015 TRENDnet. All Rights Reserved.
"Access the management page" on page 27).

Bridge Mode

TEW-734APO
15