Dhcp Client; Extra Information - TRENDnet TEW-740APBO User Manual

TRENDnet User's Guide
o Data Rate: Current wireless data rate of the access point.

DHCP Client

Display detailed information of the access point's DHCP server.

Service: Status of access point's DHCP server

Start IP: Starting IP address of access point's DHCP server

End IP: Last IP address used on the access point's DHCP server

Default Gateway: Assigned gateway address to the access point

DNS1/2: Assigned DNS to the access point's DHCP server

WINS: Assigned WINS to the access point's DHCP server

Domain: Domain assigned to access point

Lease Time: DHCP lease time of access point's DHCP server

DHCP Client list: List of clients connected to the access point
© Copyright 2016 TRENDnet. All Rights Reserved.

Extra Information

Users could pull out information such as Route table, ARP table, MAC table, Bridge table
or STP available in the drop-down list from system. The "Refresh" button is used to
retrieve latest table information.

Route table information: Select "Route table information" on the drop-down list
to display route table. The access point could be used as a L2 or L3 device. It
doesn't support dynamic routing protocols such as RIP or OSPF. Static routes to
specific hosts, networks or default gateway are set up automatically according to
the IP configuration of system's interfaces. When used as a L2 device, it could
switch packets and, as L3 device, it's capable of being a gateway to route packets
inward and outward.

ARP table Information: Select "ARP Table Information" on the drop-down list to
display ARP table. ARP associates each IP address to a unique hardware address
(MAC) of a device. It is important to have a unique IP address as final destination to
switch packets to.
TEW-740APBO
59