11Mbps Wireless LNA Access Point User's Manual
The DHCP Client Tab
The DHCP Client tab allow you to enable/disable DHCP client. If any item had been changed,
you need to click Save button to store new settings.
Enable DHCP Client
Enable the Access Point to act as a DHCP client. This is the default setting of the AP.
Static IP Address
If the Access Point act as a DHCP client, and it has a static IP address, fill the address on
this field. The default static IP address is 10.0.0.1
Network Mask
The Network Mask (Subnet Mask) for the IP Address. The default Network Mask is 255.0.0.0
21