Product Hardware Features - TRENDnet TEW734APO User Manual

TRENDnet User's Guide
Encrypted Wireless
Support for wireless encryption of up to WPA2
Mounting Hardware
Pole mounting hardware included
* Effective wireless coverage may vary depending on the wireless device's output
power, antenna gain, antenna alignment, receiving sensitivity, and radio interference.
Additionally environmental factors such as weather conditions, physical obstacles, and
other considerations may affect performance. For optimal results, we recommended
consulting a professional installer for site survey, safety precautions, and proper
installation.
© Copyright 2015 TRENDnet. All Rights Reserved.

Product Hardware Features

Access Point Side View
 Diagnostic LEDs: Provides device status.
o Wireless Signal: Blinks green during wireless network activity.
 Green (Good), Yellow (Moderate), Red (Poor)
o LAN: Blinks green during network activity
o Power: Solid green when the device has power
 Ethernet port: 1x 10/100Mbps Auto-MDIX port. Connect the side marked "PoE"
of PoE adapter to this port. Depending on the mode settings applied, the
Ethernet port can function as the network WAN port or LAN port. Note:To access
the Ethernet port, remove the bottom cap.
 Reset button: Press and hold the reset button for 15seconds to reset the unit
back the factory default settings. Note: To access the reset button, remove the
bottom cap
TEW-734APO
Reset Button
Diagnostic LEDS Ethernet Port
4