Table of Contents
Advertisement
TRENDnet User's Guide
4. Plug an Ethernet cable to the access point and plug the other end of the cable to the
side of the PoE adapter marked PoE.
5. Take another Ethernet cable and plug it on the side of the PoE adapter marked LAN,
plug the other end of the cable to your network.
6. Verify that the following LED indicators on the access point: Power (Solid Green), LAN
(Solid/Blinking Green) and WLAN (Blinking Green).
7. Open your web browser (e.g. Internet Explorer, Firefox, Safari, Chrome, or Opera) and
go to http://192.168.10.100. The access point will prompt you for a password.
8. Enter the default user name and password and then click Login.
Default System Username and Password: admin
© Copyright 2015 TRENDnet. All Rights Reserved.
9. Click the System button on the left side and then System Settings.
10. Select Fat AP in the Mode drop down menu and select the proper Country/Region.
Note: FCC domain products will only support United States Country/Region.
11. Click Apply button to save your setting.
12. Once the configuration is saved. Click the Wireless button on the left side and then
Basic Settings.
TEW-734APO
8
Advertisement
Table of Contents
