Basic Operating Procedures; Connecting The Printer - Novexx Solutions 64 Series User Manual

02/16 Rev. 04

Basic Operating Procedures

Connecting the printer

1. Ensure that the printer is switched off (mains switch [11C] at "0" position).
2. Connect the mains cable [11B] that came with the printer to the mains connector
3. Connect the mains cable into a mains socket.
4. Using a suitable data cable [11A], connect the printer to a data host
1)
USER MANUAL
WARNING!
The printer operates using mains voltage! Touching electrically live parts can cause
exposure to hazardous electrical currents and may lead to burns.
 Make sure that the printer is switched off before connecting the power cable.
 Only operate the printer using the system voltage indicated on the nameplate.
 Only connect the printer to a grounded power socket fitted to authorised stan-
dards.
 The power cable should be run to the printer so that
• nobody will trip on it, and that
• the power plug can easily be pulled out if necessary.
at the printer.
A
[11] Sockets for data cable (here: Centronics) (A) and power cable (B).
Cables: Ordering numbers for suitable power or data cables can be found in top-
ic section „Accessories".
e. g. computer or network
64-xx
C
B
Basic Operating Procedures
1
.
12