Installation - tecan MagicPrep NGS Operating Manual


Remove the cardboard insert and power cable from inside the box and place to one side.

Lift the outer shipping brown cardboard casing up off the bottom cardboard tray and place to
one side.

Inspect the interior sales packaging around the MagicPrep NGS instrument and note if there is
any damage. The foam packaging supports are designed to protect the MagicPrep NGS
instrument.

Using two people, lift the MagicPrep NGS box up, remove the lower shipping cardboard tray to
one side and remove the protective foam supports from each end.

Cut the black or white plastic packaging strip and remove and dispose

Lift the sales packaging cover up and off the MagicPrep NGS instrument. Take the small
cardboard box containing the re-usable sample deck and sample deck bench support and
power cable away from the instrument and place to one side.

Remove the foam packaging/protective material from the front and rear of the instrument.

Using two people, one at each end, lift the MagicPrep NGS instrument out of the white
cardboard tray, remove the plastic packaging and place in position on the laboratory bench.
5.3

Installation

Air flow
Take care to position the MagicPrep NGS instrument in a location that allows sufficient space from
walls or other objects that might limit airflow. It is recommended to have an unobstructed gap of at
least 15 cm (6 inches) to the sides and the rear of the instrument.

Ensure that the MagicPrep NGS instrument is installed on a level surface.

Having placed the MagicPrep NGS instrument in a suitable location on the level laboratory
bench, remove the protective film from the front touch screen panel.

Remove the power cable from the small cardboard box and insert into the power socket at the
rear of the instrument.
Power supply
The MagicPrep NGS instrument requires the following power supply: 100-240 VAC, 50-60 Hz

Plug the power cable into the laboratory power socket (complying with the power requirements
noted in section 1.5 – Power Supply).

Switch the power switch at the rear on.
M01534_v1.1 MagicPrep NGS Instrument Operating Manual
Operating Manual
Page 20 of 39