Introduction; Features - Lattice Semiconductor MachXO2 Breakout Board User Manual

Table of Contents

Advertisement

MachXO2 Breakout Board Evaluation Kit
Evaluation Board User Guide

1. Introduction

This user guide describes how to start using the MachXO2™ Breakout Board, an easy-to-use platform for evaluating and
designing with the MachXO2 ultra-low density FPGA. Along with the board and accessories, this kit includes a pre-
loaded demonstration design. You may also reprogram the on-board MachXO2 device to review your own custom
designs.
The MachXO2 Breakout Board currently features the MachXO2-7000HE device. A previous version of this board
featured the MachXO2-1200ZE. The board design and features have not changed, and consequently, this document can
be used as a guide for either version of the board. If you require a board featuring the MachXO2-1200ZE, Lattice
recommends the
MachXO2 Pico Development
See the
Ordering Information
Note: Static electricity can severely shorten the lifespan of electronic components. See the
this document for handling and storage tips.

2. Features

The MachXO2 Breakout Board Evaluation Kit includes:
MachXO2Breakout Board – The board is a 3 inches x 3 inches form factor that features the following on-board
components and circuits:
MachXO2 FPGA – Current board version: LCMXO2-7000HE-4TG144C
(Previous board version no longer available: LCMXO2-1200ZE-1TG144C)
USB mini-B connector for power and programming
Eight LEDs
60-hole prototype area
Four 2 x 20 expansion header landings for general I/O, JTAG, and external power
1 x 8 expansion header landing for JTAG
3.3 V and 1.2 V supply rails
Pre-loaded Demo – The kit includes a pre-loaded counter design that highlights use of the embedded MachXO2
oscillator and programmable I/O configured for LED drive.
USB Connector Cable – The board is powered from the USB mini-B socket when connected to a host PC. The USB
channel also provides a programming interface to the MachXO2 JTAG port.
Lattice Breakout Board Evaluation Kits Web Page – Visit
documentation (including this guide) and drivers for the kit.
The content of this user guide includes demo operation, programming instructions, top-level functional descriptions of
the Breakout Board, descriptions of the on-board connectors, and a complete set of schematics
© 2014-2022 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal.
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
6
Kit.
section for more information.
www.latticesemi.com/breakoutboards
Storage Handling
section of
for the latest
FPGA-EB-02051-2.3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MachXO2 Breakout Board and is the answer not in the manual?

Table of Contents