Table of Contents
Advertisement
MachXO2 Breakout Board Evaluation Kit
Evaluation Board User Guide
3. Storage Handling
Static electricity can shorten the lifespan of electronic components. Observe these tips to prevent damage that could
occur from electro-static discharge:
•
Use anti-static precautions such as operating on an anti-static mat and wearing an anti-static wrist-band.
•
Store the evaluation board in the packaging provided.
•
Touch a metal USB housing to equalize voltage potential between you and the board.
4. Software Requirements
You should install the following software before you begin developing designs for the Breakout Board:
•
Lattice Diamond® design software
•
FTDI Chip USB hardware drivers (installed as an option within the Diamond installation program)
5. MachXO2 Device
This board currently features the MachXO2-7000HE FPGA which offers embedded Flash technology for instant-on, non-
volatile operation in a single chip. Numerous system functions are included, such as two PLLs and 256 Kbits of
embedded RAM plus hardened implementations of I2C, SPI, timer/counter, and user Flash memory. Flexible, high
performance I/O support numerous single-ended and differential standards including LVDS, and also source
synchronous interfaces to DDR/DDR2/LPDDR DRAM memory. The 144-pin TQFP package provides up to 114 user I/O in
a 20 mm × 20 mm form factor. Previous versions of this board featured the MachXO2-1200ZE PLD in the same package.
This version of the board is no longer available. A complete description of this device can be found in the
Family Data Sheet
(FPGA-DS-02056).
© 2014-2022 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal.
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
8
MachXO2
FPGA-EB-02051-2.3
Advertisement
Table of Contents
