Introduction; Crosslink-Nx Evaluation Board; Features - Lattice Semiconductor CrossLink-NX User Manual

CrossLink-NX Evaluation Board

User Guide

1. Introduction

The Lattice Semiconductor CrossLink™-NX Evaluation Board allows designers to investigate and experiment with the
features of the CrossLink-NX Field Programmable Gate Array (FPGA). The features of the CrossLink-NX Evaluation Board
can assist engineers with the rapid prototyping and testing of their specific designs.
The CrossLink-NX Evaluation Board is part of the CrossLink-NX Evaluation Kit, which includes the following:

CrossLink-NX Evaluation Board pre-loaded with the shipping demo design

12 V AC/DC power adapter and international plug adapters

Lattice Radiant® Software license information

USB-A to USB-B (Mini) Cable for programming FPGA through a PC

Quick Start Guide
The contents of this user guide include top-level functional descriptions of the various portions of the development
board, descriptions of the on-board headers, diodes and switches and a complete set of schematics.
1.1. CrossLink-NX Evaluation Board
The CrossLink-NX Evaluation Board features the CrossLink-NX FPGA in the 400-ball caBGA package (LIFCL-40-9BG400C)
w the ability to expand the usability of the CrossLink-NX with Raspberry Pi, PMOD, FMC LPC connector, along with
access to PCIe channel. 118 wide range I/O and 37 high speed differential pairs are available for user-defined
applications.
Figure 1.1 shows the top view of the CrossLink-NX Evaluation Board.
Figure 2.1 shows the jumper locations.

1.2. Features

The CrossLink-NX Evaluation Board includes the following features:

CrossLink-NX FPGA (LIFCL-40-9BG400C)

General Purpose Input/Output (GPIO) breakout with Raspberry Pi, PMOD, and FMC connector

MIPI CSI-2 Camera connector and D-PHY connector

118 wide range I/O and 37 high speed differential pair I/O with on board termination

x1 Gen2 PCIe interface

USB-B connection for device programming and Inter-Integrated Circuit (I

On-board Boot Flash – 128 Mbit Serial Peripheral Interface (SPI) Flash, with Quad read feature

Eight input DIP switches, four push buttons, three status LEDs and 14 LEDs for demo purposes

Lattice Radiant

Multiple reference clock sources

Potentiometer for ADC test
Caution:
© 2019-2020 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal.
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
6
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
® Software programming support
The CrossLink-NX Evaluation Board contains ESD-sensitive components. ESD safe
practices should be followed while handling and using the development board.
Figure 1.2 shows the bottom view of the board.
2
C) utility
FPGA-EB-02028-1.3