Yardworks 060-1314-4 Manual page 60

3i. Any CPE Authorized and approved emission-related replacement part may be used in the performance of
any ECS Warranty maintenance or repair and will be provided without charge to the owner. Such use shall
not reduce CPE's warranty obligation.
3j. Unapproved add-on or modified parts may not be used to modify or repair a CPE engine. Such use voids
this ECS Warranty and shall be sufficient grounds for disallowing an ECS Warranty claim. CPE shall not
be liable hereunder for failures of any warranted parts of a CPE engine caused by the use of such an
unapproved add-on or modified part.
EMISSION-RELATED PARTS INCLUDE THE FOLLOWING:
(using those portions of the list applicable to the engine)
Systems covered by
this warranty
Fuel Metering System
Air Induction System
Ignition System
Exhaust System
Miscellaneous Parts
Evaporative Emissions
TO OBTAIN WARRANTY SERVICE:
You must take your CPE engine or the product on which it is installed, along with your warranty registration card or
other proof of original purchase date, at your expense, to any Champion Power Equipment dealer who is authorized
by Champion Power Equipment, Inc. to sell and service that CPE product during his normal business hours. Alternate
service locations defined in Section (3)(f.) above must be approved by CPE prior to service. Claims for repair or
adjustment found to be caused solely by defects in material or workmanship will not be denied because the engine
was not properly maintained and used.
If you have any questions regarding your warranty rights and responsibilities, or to obtain warranty service,
please write or call Customer Service at Champion Power Equipment, Inc.
Fuel regulator, Carburetor and internal parts
Air cleaner, Intake manifold
Spark plug and parts, Magneto ignition system
Exhaust manifold, catalytic converter
Tubing, Fittings, Seals, Gaskets, and Clamps associated with these listed systems.
Fuel Tank, Fuel Cap, Fuel Lines (for liquid fuel and fuel vapors), Fuel Line Fittings,
Clamps, Pressure Relief Valves, Control Valves, Control Solenoids, Electronic Controls,
Vacuum Control Diaphragms, Control Cables, Control Linkages, Purge Valves, Gaskets,
Liquid/Vapor Separator, Carbon Canister, Canister Mounting Brackets, Carburetor
Purge Port Connector
Champion Power Equipment, Inc.
12039 Smith Ave.
Santa Fe Springs, CA 90670
1-877-338-0999
Attn.: Customer Service
tech@championpowerequipment.com
Parts Description