Yardworks 060-1314-4 Manual page 36

36
model no.
060-1314-4
4. If you are able to adjust the speed lever to top most or bottom most position, move the
lever to rest on the boss between R1 and R2 (both reverse speeds), then adjust the
center bolt and nut until the cable is tight on the top most cable as shown. Do not over
tighten the bolt and nut. Do not do adjust the other cable.
5. Set the handle to the boss between D5 and D6 (top 2 forward speeds), then adjust the
center bolt and nut until the cable is tight as shown. Do not over tighten the bolt and
nut.
6. Try the speed control lever in any position, both cables should be straight, but not
overly tight in any position. If not, repeat step 3 through 5.
7. Perform a speed test to confirm everything is in working order. If you're still
experiencing issues, please look at the next steps.
| contact us: 1.866.523.5218