Yardworks 060-1314-4 Manual page 35

model no.
060-1314-4
ADJUSTING Self-DRIVe SPeeD
CONTROl HANDle CAbleS
1. Make sure all fluids are removed and
spark plug is disconnected.
2. Locate the speed control cables. There
are 2 cables.
Nut
Center Bolt
| contact us: 1.866.523.5218
3. Move the speed control lever to the
fastest (top) and slowest (bottom)
position. If you are able to move the
lever to these 2 positions, go to the
next step. If not, adjust the center bolt
and nut to loosen the cable, then you
can set the handle to either the fastest
or slowest speeds. Loosen the nut
counterclockwise, then loosen the
center bolt clockwise. Test function.
Tighten the nut clockwise against the
long sleeve bolt.
35