Yardworks 060-1314-4 Manual page 17

model no.
060-1314-4
CHeCK/ADD eNGINe OIl
Capacity of engine oil: 16.9 fl. oz. (0.5 l)
Use 0W-30, but in some cases, depending
on weather, 5W-30 will work. See chart for
oil type recommendations.
Weather will affect engine oil and engine
performance. Change the type of engine oil
used based on weather conditions to suit
the engine needs.
Synthetic oil may be used after the 5-hour
initial break-in period. Using synthetic oil
does not increase the recommended oil
change interval.
1. Check the oil with engine stopped and
level.
2. Remove the oil cap/dipstick (6-1) and
wipe it clean (Fig. 6).
Oil Needed
Oil Full
 WARNING: Machine is shipped without engine oil, properly fill engine
oil prior to use to prevent engine damage.
| contact us: 1.866.523.5218
Figure 7
Recommended Engine Oil Type
0W-30
°F -20 0
°C
-28.9 -17.8
Ambient temperature
6-1
Figure 6
3. Insert the oil cap/dipstick into the oil
filler neck but do not screw it in, then
remove it to check the oil level.
4. If the oil level is near or below the
lower limit mark on the dipstick,
remove the oil cap/dipstick, and fill
with the recommended oil to the upper
limit mark. Do not overfill (Fig. 7).
5. Reinstall the oil cap/dipstick.
17
/ 5W-30
20 40
-6.7 4.4