Yardworks 060-1314-4 Manual page 45

model no.
060-1314-4
6. Save the key from each wheel. Do not
lose each key from each wheel. You
will need this when you put it back
together.
8. Remove the connecting shaft as shown
by removing the B clip and sliding the
rod out of the way. This will allow you
to move the friction disc away from the
large auger pulley. Remove the auger
belt from the larger pulley.
 WARNING: If cutting the belt be careful of the tensioning pulley and arm as they are spring
loaded and could cause injury when the belt is cut.
| contact us: 1.866.523.5218
7. Remove the base frame cover from
the underside of the snowblower by
removing the six M6 × 16 screws which
secure it.
45