Yardworks 060-1314-4 Manual page 29

model no.
060-1314-4
ADJUSTING THe Self-PROPelleD DRIVe SySTeM:
1. Release the self-drive control lever to bring the snowblower to a stop.
2. Move the speed-control lever to the gear (either forward or reverse) that you require.
3. Press the self-drive control lever to engage the drive system.
Smart Steer technology enables effortless power steering on your snowblower. Smart Steer
technology is able to sense the direction your trying to turn the snowblower and engages
the drive system to assist turning in the desired direction.
ClUTCH lOCK feATURe
This snowblower offers a clutch lock feature that will enable the operator to keep the
snowblower moving forward while you adjust the chute. To use the clutch lock system,
follow the following steps.
While both the drive and auger control levers are fully depressed, release the auger
–
control lever while keeping the self-drive control lever fully depressed. The clutch lock
feature will automatically keep the auger control lever engaged as long as the self-drive
control lever is depressed.
This allows the operator to keep driving the snowblower while they now use their right
–
hand to make any adjustments to the discharge chute needed to maximize operation.
To disengage the clutch lock feature simply release the self-drive control lever.
–
| contact us: 1.866.523.5218
29